连接接口
Specification
连接接口
8 Ports PoE Ethernet Switch
3
4
Specification change will not be noticed
8 Ports PoE Ethernet Switch
连接接口
连接接口
Troubleshoot
Please follow this step if the equipment have trouble.
Make sure the equipment is installed according to the manufactures installation guide.
Confirm RJ45 cable order meet EIA/TIA568A or 568B standard.
Every PoE port can provide PoE equipment maximum power less than 30W, please do not
connect the PoE equipment with power over 30W.
Replace the equipment that can not work with a proper functioning 8port PoE Ethernet
switch to check if the equipment is damaged.
Please contact your vendor if trouble still exists.
Instruments to be used: wire crimper, network tester. Wire sequence of RJ45 plug should
conform with EIA/TIA568A or 568B.
1) Please remove 2cm long the insulating layer, and bare 4 pairs UTP cable;
2) Separate the 4 pairs UTP cable and straighten them;
3) Line up the 8 pieces of cables per EIA/TIA 568A or 568B;
4) Cut off the cables to leave 1.5cm bare wire;
5) Plug 8 cables into RJ45 plug, make sure each cable is in each pin;
6) Use the wire crimper to crimp it;
7) Repeat above 5 steps to make the another end;
8) Using network tester to test the cable if it works.
Plug Producing Method
Pin
Color
White/Green
Green
Blue
White/Orange
White/Blue
White/Brown
Orange
Brown
1
2
3
4
5
6
7
8
Pin
Color
1
2
3
4
5
6
7
8
White/Green
Green
Blue
White/Orange
White/Blue
White/Brown
Orange
Brown
EIA/TIA 568A
EIA/TIA 568B
When choose RJ45 make sure if one end is EIA/TIA568A,the other end should also be EIA/TIA568A.
When choose RJ45 make sure if one end is EIA/TIA568B,the other end should also be EIA/TIA568B.
Notice
Item
Description
Power
Power Supply
Power Adaptor
Voltage Range
DC48V~54V
Consumption
＜5W
Ethernet
Speed
1～8 port:Default:10/100Mbps;
CCTV:10Mbps;
UPLINK:100Mbps
Transmission Distance
1-8 port:Default:0～100m;CCTV:0~250m;
UPLINK:20km
Network Switch
Ethenet Standard
IEEE 802.3/802.3u/802.3af/at
Backplane Bandwidth
1.8G
Packet Forwarding Rate
1.34Mbps
Packet Buffer
768K
MAC
2K
Status Indicator
Power Light
1pcs Red
(
)
Ethernet Port Light
2pcs(Yellow&Green) on RJ45,yellow indicates PoE,
green indicates
/ ct
Link A
Fiber Light
1pcs(Green), green indicates Link/Act
Surveillance Module
Light
1pcs(Green), green indicates CCTV
Protection Level
Pluse Group
Level 2
Standard: IEC61000-4-4
ESD
1a Contact Discharge Level 3
1b Air Discharge Level 3
Standard: IEC61000-4-2
Anti-thunder Level
Level
2
Working
Environment
Working Temperature
0 ~55℃
℃
Storage Temperature
-40 ~85℃
℃
Humidity(Non-
condesing)
0~95%
Mechanical
Dimension(L*W*H)
200mm×101.8mm×27mm
Out Shell
Galvanized Sheet
Color
Black
Weight
500g
Stability
MTBF
>50000h
Power/Distance
54V
Distance
100m
150m
200m
250m
Power
26W
24W
23W
21W
