Surveillance module
indicated light normally on
Please check the following items before installation, if it is missing, please contact the
dealer .
8 port PoE Ethernet Switch 1pc
Power adaptor 1pc
AC power cable 1pc
Accessory 1set
User manual 1
set
1) Please turn off the signal power and display device power before installation, installation
with power will damage the transmission equipment;
2) Use network cable connect PoE IP camera and 1～8 downlink ports of product respectively;
3)Use a network cable connect equipment uplink port and NVR or computer;
4)
5) Check if the installation is correct, equipment is in good condition, the connection is
stable, then provide power for system;
6) Ensure the Ethernet equipment with power and work properly.
Connect power adapter;
Installation
step
Feature
8 Ports PoE Ethernet Switch
8 Ports PoE Ethernet Switch
User Manual
1
2
8 ports PoE Ethernet Switch is a security surveillance Ethernet Switch which aims at Ethernet
high definition surveillance and Ethernet project security system. The product fully combines
the characteristics of security surveillance, provides fast packet forwarding ability and
abundant backplane bandwidth, which ensures clear image and fluent transmission. ESD
and surge protection circuit can improve product stability. The product supports one key
CCTV model, can achieve VLAN, control the Net storm, protect the information security,
prevent the viral transmission and Ethernet attack, fully satisfy the Ethernet video security
surveillance system and Ethernet project needs.
Board
Diagram
VerB 1.0
● Major ports: 1 pcs 100Mbps uplink fiber port, 8 pcs 100Mbps downlink Ethernet
port , every port supports MDI/MDIX;
● Special function: One key CCTV mode; 1～8 downlink ports can only communicate with
uplink ports;
● Power input: DC48V～57V;
● Transmission Distance: 0～100m; the furthest transmission distance could reach 250m in
CCTV model; Optical port can reach 20km;
● Standard: Meet IEEE802.3 、IEEE802.3u、IEEE802.3 af/at standards,
PoE use End-Span, the spare cable can be of other use;
● Protection: Excellent anti-thunder, anti-static and anti-interference ability;
● Appearance: Delicate design and easy installation, configure the anti-theft lock hole,
guard against theft;
●Operation: Plug and Play, No Setting required.
Notice
The transmission distance is related to the connected cable. We suggest standard Cat5e/6
network cable, so the transmission distance can up to further distance!
1) The equipment must connect the ground according to the request. anti-thunder need to
connect with the ground port
2) Turn the dial switch for left, the equipment can enter surveillance module after providing
equipment power.
Please follow below the installation steps
Fibe
r
8 p
orts P
oE e
thern
et s
witc
h
Cat5
/5e/6 n
etwo
rk c
able
PoE IP camera
PoE IP camera
pow
er
Fibe
r C
onve
rter
NVR
PoE IP camera
PoE IP camera
PoE IP camera
PoE IP camera
Application
Front board
Back board
Side board
Notice
：
Power indicated light
lock
uplink fiber port
ground port
power input port
PoE
down
link
port
fiber indicate light
