Please follow the below installation steps
Please check the following items before installation, if it is missing, please contact the
dealer .
4 ports PoE Ethernet Switch 1pcs
Power adaptor 1pcs
AC power cable 1pcs
Accessory 1pcs
User manual 1pcs
1) Please turn off the signal power and display device power before installation, or it will
damage the transmission equipment;
2) Use network cable connect PoE IP camera and
Use a network cable connect equipment uplink port and NVR or computer;
4)
5) Check if the installation is correct, equipment is in good condition, the connection is stable,
then power on for system;
6) Ensure the Ethernet equipment with power on can work properly.
1～4 downlink ports of product respectively;
3)
Connect power adapter;
Installation steps
Feature
4 Ports PoE Ethernet Switch
4 Ports PoE Ethernet Switch
User Manual
1
2
4 ports PoE Ethernet Switch is a
aims at Ethernet
high definition surveillance and security system. The product fully combines the characteristics
of security surveillance, provides fast packet forwarding ability and abundant backplane
bandwidth, which ensures clear image and fluent transmission. ESD and surge protection
circuit can improve product stability. The product supports one key CCTV model, with
security surveillance Ethernet Switch which
VLAN
function can restrain the nentwork storm, protect the information security, prevent the viral
transmission and cyber attack, fully satisfy the Ethernet video security surveillance system and
Ethernet project needs.
Board
Diagram
Front board
VerB 1.3
● Major ports: 1pcs*100Mbps uplink Ethernet port, 4pcs*100Mbps downlink Ethernet
ports , every port supports MDI/MDIX;
● Special function:
;
downlink ports can only communicate
with uplink ports;
● Power input: DC48V～57V;
● Transmission Distance : Ethernet port 0～100m;
● Standard: Meet IEEE802.3 ,IEEE802.3u,IEEE802.3 af/at standards, PoE use
End-Span, the spare cable can be of other use;
● Protection: Excellent anti-thunder, anti-static and anti-interference ability;
● Appearance: Delicate design and easy installation, configure the anti-theft lock
hole, guard against theft;
●Operation: Plug and Play, No Setting required.
One key CCTV model 1 4
～
the furthest transmission distance
could reach 250m in CCTV model; Uplink port can reach 100m;
Anti-Theft Lock
Back board
Side board
Notice
The transmission distance is related to the connected cable. We suggest standard
Cat5e/6 network cable, so the transmission distance can up tofurthest!
1
2
)
) Turn the dial switch for left, the equipment can enter surveillance module after providing
equipment power.
Device must be connected with lightning protection grounding; otherwise protection
level will reduce; please use above No.20 wire to connect the grounding terminal.
4 P
orts P
oE E
thern
et S
witch
Cat5/5
e/6 n
etwor
k cab
le
LC
D
NVR
PoE PTZ Camera
PoE IP Camera
PoE Dome Camera
PoE IP Camera
pow
er
PoE downlink
Ethernet port
Ethernet port Ground
Power
input port
Surveillance module
indicated light
normally on
Power
indicated light
Notice
Application
