Please check the following items before installation, if it is missing, please contact the
dealer .
8 ports PoE Ethernet Switch 1pc
Power adaptor 1pc
AC power cable 1pc
Accessory 1set
User manual 1
set
1) Please turn off the signal power and display device power before installation, installation
with power will damage the transmission equipment;
2) Use network cable connect IP camera and 1～8 down link ports of product respectively;
3)Use a network cable connect equipment up link port and NVR or computer;
4) Turn on the power of the equipment;
5) Check if the installation is correct, equipment is in good condition, the connection is
stable, then provide power for system;
6) Ensure the Ethernet equipment with power and work properly.
Installation
steps
Feature
8 Ports PoE Ethernet Switch
8 Ports PoE Ethernet Switch
1
2
8 ports PoE Ethernet Switch is a surveillance security Ethernet switch which aims at Ethernet
high definition surveillance, Ethernet project security system. The product fully combines the
characteristic of surveillance security, provides fast packet forwarding ability and abundant
backplane bandwidth, which ensures clear image and fluent transmission. Inserted static,
surge protection circuit can improve product stability. The product supports one key CCTV
model, can achieve VLAN, QoS priority after configuration, control the Net storm, protect the
information security, prevent the viral transmission and Ethernet attack, fully satisfy the
Ethernet video surveillance security system and Ethernet project needs.
Board
Diagram
Front board
VerB 1.0
● Major ports: 1 pc 100Mbps up link Ethernet port, 8 pcs 100Mbps down link Ethernet
ports , every port supports MDI/MDIX;
● Special function: One key CCTV model;
● Power input: DC48V～57V;
● Transmission Distance: 0～100m;
● Standard: Meet IEEE802.3, IEEE802.3u, IEEE802.3 af/at standards,
PoE use End-Span, the spare cable can be of other use;
● Protection: Excellent anti-thunder, anti-static and anti-interference ability;
● Appearance: Delicate design and easy installation, configure the anti-theft lock hole,
guard against theft;
●Operation: Plug and Play, No Setting required.
Back board
Side board
Notice
The transmission distance is related to the connected cable. We suggest standard Cat5e/6
network cable, so the transmission distance can up to 100m!
1) The equipment must connect the ground according to the request.
2) Turn the dial switch for left, the equipment can enter surveillance module after providing
equipment power.
Description
：
Power
indicated light
Surveillance module
indicated light
normally on
Kensington lock
PoE down link
Ethernet port
Up link
Ethernet port
Ground
Power
input port
Application
8 P
orts P
oE E
ther
net S
witc
h
Cat5
/5e/6 n
etw
ork c
able
pow
er
NVR
. . . . . .
PoE PTZ camera
PoE Dome Camera
PoE IP Camera
PoE IP camera
Please follow below the installation steps
