Note
: Be sure to set the power switch on the receiver to "OFF" before following steps
below.
1. Connect one end (triple plugs) of the RCA cable to the A/V jacks on the Receiver,
and the other end to the A/V In jacks on your TV.
Be sure to match the color of the plugs in both connection.
If your TV has a single Audio Input jack, connect white RCA plugs (Audio-L) in
both connection.
2. Turn on the receiver and set your TV to Video mode to view the receiving A/V
signal from the receiver.
3. If your TV has a single input port (Antenna Input jack) you can connect both
units with the RF cable. Connect one end of the RF cable to the Antenna In jack on
your TV and the other end to the RF Out jack on the receiver unit.
4. Set the RF channel selector on the receiver to Ch3 or Ch4 whichever is not used in
your area. Set your TV channel corresponding to the selected channel on the receiver.
INSTALLATION OF WIRELESS RECEIVER
RECEIVING AUDIO/VIDEO ON REMOTE TV (Cont'd)
5. Search the channel 1-4 by pressing the Channel Selector on the receiver and select
the best one for optimum reception in your area.
Note
: Both transmitter and receiver units must be set to the same channel.
6. Adjust the antenna direction as necessary.
