5
30 seconds, and then release when the blue light shines steadily. The blue light
sustains shining two seconds and then extinguishes.
z
Turn the MP3 part off:
Press the MP3 play & pause button for two seconds,
and the MP3 part is on, then went into off mode completely.
Note:
When music is playing, if turn off the Bluetooth part at this time, the
music will pause for 1 second, and this is a normal phenomenon. Meanwhile, if
the MP3 part is in off state, then its red light will flash one time (but not turn
the MP3 on), which is normal too.
Paring Your Headset and Phone
Note:
Before used to call, the Bluetooth headset has to pair with your
mobile phone.
(“Paring" refers to establish a link between Bluetooth devices, and make the
mobile phone store unique identified ID of the headset. After paired with the
cell phone, the headset will connect to the cell phone automatically when there
is an incoming call.)
1. Place the headset and your cell phone together (not over one meter). When
the headset is in off state, press the multi-function button continued about eight
seconds until the blue light shines steadily, and now the devices get into pairing
state.
2. Turn on the search for Bluetooth devices function of your mobile phone.
(Please refer to the mobile phone’s user-manual.) When the mobile phone
finished search, it will display the found device.
3. In the device list display "trademark - E26," and please confirm according to
your phone’s instruction.
4. During the phone confirm process, input the password "0000" and confirm
pairing. The headset’s ID will be stored in the mobile phone. And when the
indicator light of the headset will flash quickly which means that pair
successfully.
