Aesthetic cover
The unit provides the use of a series of aesthetic covers available when ordering. The replacement of the covers occurs through simple steps:
- Remove the motor support cover (as carried out and indicated for filter cleaning and removal)
- Unscrew the four rear screws holding the standard plastic cover
- Position the cover aesthetic and screw the four screws of the new cover.
Installation Kit output angle
The kit provides for the possibility 'to install the discharge of the product with angular flow direction. For example: if you have the parapets between the
window and the outer wall, you can mask the grid using the corner kit. In this case the exit will be near the window.
22
External aesthetic grid
The aesthetic external grid is the alternative to the external grill already supplied with the product. The grid is composed of a flat plate for comfortable fixing
to a wall. Installation is done through 4 simple steps:
- fix the flat part of the aesthetic grid with the supplied dowels
- install the plastic circular grid (supplied in the standard product) through the hole of the plate
- put the part of aesthetic finish
- ensure the centering of the hole of the grid relative to the tube to avoid load losses and air obstructions
For the inspection of the heat exchanger and the inside of the pipe, not remove the screws of the wall, but only remove the locking parts from the template.
Do the following with the appliance not powered:
- removing the cover with filter
- freeing the four fixing clamps from its seat
- Unscrew the four parts locking the template paying attention to the wires
- remove the motor mounting platform that will remain 'lifted from the wires and will allow the cleaning of the heat exchanger and the pipe
- mount the motor support plate
- placing the wires and the clamps and mount the cover with filter
