UHKVM-70X: 4K HDMI2.0 USB KVM Extender
U.T.E. electronic GmbH & Co. KG
10
www.ute.de
6. Troubleshooting & Maintenance
⚫
No image output:
•
Firstly, please check and make sure the power supply is connected well. Then,
check and make sure all cables are connected correctly.
•
Please check and make sure the right HDMI input port of the TV/ screen has
been chosen.
•
Please check and make sure there is HDMI signal to be fed into transmitter unit,
and check and make sure the receiver unit has been connected well with the
display device.
⚫
Data transmission indicator flashes and no output
:
•
Check and make sure the HDMI display device has been switched to the right
HDMI input channel.
⚫
Connection indicator keeps off:
•
Check whether the TX’s HDMI IN has signal input and make sure RX’s OUT is
well connected with HDMI display.
⚫
Output image with snow point:
•
Change the HDMI cable between the transmitter unit and the source device, it
will be better to use a shorter HDMI cable for re-testing.
Note:
If your problem still remaining after following the above troubleshooting
steps, please contact your local dealer or distributor for further assistance.
