33
Turning UDI-28
™ boat unit On and Off
To turn the UDI-28™ boat unit on
:
1.
Press and hold the
Enter
button for about 5 seconds. The UTC Proprietary screen opens, the
buzzer is heard and the LED is blinking.
2.
Press the
Enter
button again. The current settings screen opens.
Press the
Enter
button again. The main menu opens.
To turn UDI-28™ boat unit off
:
Press and hold the
Enter
button for about 5 seconds. The UDI-28™ turns off.
Scrolling the menus
To scroll through the menu options, press the
Up
or
Down
buttons.
To select an option, press the
Enter
button.
UDI-28
™ Boat unit main menu
The main UDI-28™ menu allows you to access UDI-28™ functions. The main menu flowchart is shown
below.
4. Setup
1. Messages
2. Compass
Main
3. Trans.
Homing
The various functions are described in detail as follows:
Messages – see page 33
Compass – see page 36
Transmit homing – see page 38
Setup – see page 38
Sending and receiving text messages
Messages are pre-set using the PC connection and UDI-28™ software. To modify the pre-set message
list, See the UDI28-MANAGER user manual.
WARNING
: When transmitting messages, the antenna cable must be plugged into the boat unit.
