19
Select a ring level
and press
Enter
AUDIO
2 Med-High
1 High
3 Med
LED Control
Use this option to turn on or off the Green LED control which allows the LED on the UDI-28™ to blink
when there is an audible alarm or when a signal is received.
Select Enable or Disable
and press
Enter
.
The Default: Enable
LED CONTROL
1. Enable
2. Disable
Contrast
Use this option to select a contrast level for the OLED display. .
The contrast interval ranges from 1 (very little contrast) to 7 (high contrast).
Use the
Up
/
Down
buttons to
define a contrast value and press
Enter
. Make sure there are no
strips seen on the screen.
CONTRAST
Contrast: 7
Units
Use this option to select Metric units (meters, degrees C) or Imperial units (Feet, degrees and
Fahrenheit) as your unit of measurement.
Select Imperial or Metric
and press
Enter
. All units displayed on the
UDI-28™ will now conform to the
unit type chosen.
UNITS
1. Imperial
2. Metric
NOTE
: The temperature displays according to your units selection – When you select Feet, Fahrenheit
degrees are shown, when you select Meters, centigrade degrees are shown.
About UDI-28
Use this option to view the UDI-28™ serial number and software version installed. Use this information
when contacting UTC about your UDI-28.
In addition the
About UDI
screen presents the table tag value, which is a unique code for each specific
UDI-28™ list of users and messages. Make sure that every UDI-28™ device and boat unit (in the same
network) has the same Table Tag value. For more information see page 4.
