10
TVE-DEC12 User Manual
System configuration
Log in and go to the Configuration menu to configure the general settings of the
decoder. The System menu has three main menus:
• System settings
• Maintenance
• User management
System settings
Use this menu to:
• Set and view the system Information, such as set the decoder name, and view the
version of the firmware and decoder.
• Set the parameters of the RS-232 communication port.
• Set the parameters of the RS-485 communication port.
To set up the system settings of the decoder:
1. Go to
Configuration
>
System
>
System Settings.
2. To set up the decoder name and view the decoder’s system information, click the
System Information
tab.
Enter th
e decoder name, if desired.
3. To set up the RS-232 parameters, click the
RS-232
tab. Select the desired RS-232
port, baud rate, data bit, stop bit, parity, flow control, and working mode parameters.
4. To set up the RS-485 parameters, click the
RS-485
tab. Select the desired RS-485
camera number, baud rate, data bit, stop bit, parity, and flow control parameters.
5. Click the
Save
to save the changes.
Summary of Contents for Interlogix TVE-DEC12
Page 1: ...TVE DEC12 User Manual P N 1073627 EN REV C ISS 27JUN19 ...
Page 4: ......
