UTC Fire and Security Interlogix NX-8E, Installation Manual

Page: 76 / 113

Appendix A: Reporting codes
72 NX-8E Control Panel Installation Manual
Keypad
number Partition
1 2 3 4 5 6 7 8
4 216 217 218 219 220 221 222 223
5 224 225 226 227 228 229 230 231
6 232 233 234 235 236 237 238 239
7 240 241 242 243 244 245 246 247
8 248 249 250 251 252 253 254 255
Zone ID or user ID hex digit for 4+2 formats
Zone or user ID hex digits only apply to slow formats (Locations 56 to 83, lower
digit). The digits programmed in these locations are sent as the upper hex digit in
place of the alarm event code. The zone ID or user ID are always reported as the
lower hex digits. The following table shows the hex digit for the zone/user IDs.
For example, if the zone/user ID is 15, the 4+2 lower digit is F.
Table 18: Zone/user ID and hex digit
Zone/user ID = Hex digit Zone/user ID = Hex digit Zone/ID = Hex digit
1 = 1 2 = 2 3 = 3
4 = 4 5 = 5 6 = 6
7 = 7 8 = 8 9 = 9
10 = A 11 = B 12 = C
13 = D 14 = E 15 = F
16 = 1 17 = 2 18 = 3
19 = 4 20 = 5 21 = 6
22 = 7 23 = 8 24 = 9
25 = A 26 = B 27 = C
28 = D 29 = E 30 = F
31 = 1 32 = 2 33 = 3
34 = 4 35 = 5 36 = 6
37 = 7 38 = 8 39 = 9
40 = A 41 = B 42 = C
43 = D 44 = E 45 = F
46 = 1 47 = 2 48 = 3
49 = 4 50 = 5 51 = 6