3
Programming basics
The LCD display on the keypad has two lines of characters. Each line contains a different type of information.
The top line contains system information and the bottom line contains the instructions and the characters you
can enter on the keypad (
Figure 1. Programming display
Navigation tools
The following keys are used to move between system menus or between menu options:
• Press
Enter
to scroll forward one menu option.
• Press
Menu
to scroll backward one menu option.
• Enter
0
and press
Enter
or press
Clear
to exit the menu.
Programming guidelines
To program the menu options use the following guidelines:
• To program a value, such as a number or amount, enter the value and press
Enter
. The information will
be added and the display will show the new setting. Press
Enter
to accept the display.
• You can enter time settings in seconds or minutes. Press
Menu
to toggle between seconds and minutes
in the display.
• To program a
Yes/No
option, press
Menu
to toggle between
Yes
and
No
, and press
Enter
to accept the
display.
• If you need to change a value that is already programmed, enter the new value and press
Enter
.
• To update polling options that show the status of the current value, press
Menu
.
Smart Reader AL-1191/AL-1193
0-Exit, Menu:
