9
Night light
You can program the reader to create a night light by enabling the blue LED to illuminate faintly. When the red
or blue LED is active, the night light is off.
To enable the night light, do the following:
2. Press
Menu
to toggle between the enabled and disabled options. Press
Enter
to exit the menu and save
the displayed option.
1. From the display in
, enter
4
and
press
Enter
to access option 4.
The default display shows
Night Light
Enabled
(
).
Figure 23. Smart reader menu display
Figure 24. Night light enabled display
Smart Reader AL-1191/AL-1193
0-Exit, Menu:
Night Light Enabled
*-Change, #-Exit
