UTC Fire and Security interlogix AL-1191, Programming Manual

Page: 14 / 24

Smart Card Reader
Programming Manual
8
.
Table 2
describes the options.
5. Press
Menu
to toggle between the options. Press
Enter
to exit and save the displayed option.
4. To set the red LED, enter
2
and press
Enter
(
Figure 21
).
The default display shows
Area Secure
(
Figure 22
).
Figure 21. LED display
Figure 22. Area secure display
Table 2. Red LED options
Option Red LED is off Red LED is on Red LED flashes
Area secure Disarmed Armed -
Area secure plus door open Disarmed Armed Door open
1-Blue LED, 2-Red LED
No:
Area Secure
*-Change, #-Exit