30
Remote Booster Power Supply Technical Reference Manual
Notes
•
CC1(S) modules must be wired and programmed on the Signature controller for proper
operation.
•
Any BPS trouble causes the CC1(S) supervision to report a trouble to the main control panel
when DIP switch SW2-6 is on. AC power failure is delayed for three hours.
•
CC1(S) wiring must be within three feet of the BPS enclosure and in conduit or mounted
within the BPS’s enclosure. If CC1(S) wiring is more than three feet from a BPS enclosure,
then a separate listed EOL relay (PAM1, 6254A-003, or 73402A) or equivalent must be used
to supervise the 200 mA AUX circuit wiring.
•
When configured for AC power loss reporting using the trouble relay (DIP switch SW2-6 ON),
the CT1 module supervises and reports the AC power loss to the control panel. When DIP
switch SW2-6 is OFF, the CT1 module is not required.
Figure 19: Multiple CC1(S) modules using the BPS’s sense inputs
+
+
+
+
+
TB2
TB1
(16)
(15)
(15)
TB
5
(17)
4
8
3
7
2
6
10
1
5
9
+
+
CC1(S)
4
8
3
7
2
6
10
1
5
9
+
+
CC1(S)
+
+
+
(19)
(16)
CT1
(18)
+ +
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
