Utax P-4531DN, Operation Manual

Page: 176 / 352

Operation Panel
4-98
Buzzer (Alarm (Buzzer) setting)
This function uses tones to notify the user of printer operations and the printer status. This setting is useful, for example,
when the printer is located some distance from the user.
The options available in Buzzer are as follows:
• Key Confirmation (Key confirmation tone setting)...4-98
• Job Finish (Job completed tone setting)...4-98
• Ready (Preparation completed tone setting)...4-99
• Error (Error tone setting)...4-99
• Keyboard Confirm (Keyboard confirmation tone setting)...4-99
1
In the
Device Common
menu, press

or

to select
Buzzer
.
2
Press [OK] . The
Buzzer
screen appears.
Key Confirmation (Key confirmation tone setting)
When
On
is selected in this setting, a tone sounds each time a key is used.
1
In the
Buzzer
menu screen, press  or  to select
Key
Confirmation
.
2
Press [OK] . The
Key Confirmation
screen appears.
3
Press  or  to select whether the key confirmation tone is enabled.
4
Press [OK] . The key confirmation tone setting is set and the
Buzzer
menu reappears.
Job Finish (Job completed tone setting)
When
On
is selected in this setting, a tone sounds when printing ends.
1
In the
Buzzer
menu screen, press  or  to select
Job Finish
.
2
Press [OK] . The
Job Finish
screen appears.
3
Press  or  to select whether the printing completed tone is
enabled.
4
Press [OK] . The printing completed tone setting is set and the
Buzzer
menu reappears.
Buzzer:
Ready
Exit
03
Job Finish
02
01
Key Confirmation
Key Confirmation:
Off 01
On 02 *
Job Finish:
Off 01
On
02
*