Utax CD 1430 Instruction Handbook Manual Download Page 190

Page: 190 / 223

Troubleshooting

OPERATION GUIDE

10-3

Precautions When Turning Power OFF

To receive faxes with the power turned off, press the

Power

key on the operation panel. You cannot

automatically receive a fax when the main power switch is turned off.

Before turning off the main power switch, press the

Power

key on the operation panel. Make sure that the

Power

indicator and the

Memory

indicator are off before turning off the main power switch.

CAUTION:

The hard disk may still be operating as long as the

Power

key or

Memory

indicator is lit.

Turning the machine off at the main power switch while the hard disk is still operating can damage the
hard disk.

Make sure that the indicator is off.

Summary of Contents for CD 1430
































































































































































































































Search results

Summary of Contents for CD 1430

Reviews:

Brands by name

Popular brands

Utax CD 1430, Instruction Handbook Manual

Search results

Summary of Contents for CD 1430

Reviews:

Brands by name

Popular brands