Utax CD 1242 Instruction Handbook Manual Download Page 196

Page: 196 / 424

Document Box

6-6

OPERATION GUIDE

Sending Documents

The procedure for sending documents in a custom box is explained below.

Press the

Document Box

key.

Press [Custom Box], select the box containing the
document you want to send and press [Open].

NOTE:

If a custom box is protected by a password,

enter the correct password.

Select the document you wish to send by checking
the checkbox.

The document is marked with a checkmark.

NOTE:

You cannot select and send multiple documents.

To deselect, press the checkbox again and remove the
checkmark.

Press [Send].

The screen for sending appears.

NOTE:

Depending on the settings, the address book

screen may appear.

Set the destination.

NOTE:

For more information on selecting destinations,

refer to

Specifying Destination on page 3-30

Press the

Start

key. Sending of the selected

document begins.

1/1

0404200710574501

10/10/2008 09:40

Box:

File Name

Date and Time

Size

Status

08/08/2009 10:10

0404200710574511

0404200710574521

10/10/2008 09:50

10/10/2008 10:00

Send

Join

Move/Copy

Delete

Store File

Detail

Preview

0002

0003

Search(Name)

Summary of Contents for CD 1242









































































































































































































































































































































































































































Search results

Summary of Contents for CD 1242

Reviews:

Brands by name

Popular brands

Utax CD 1242, Instruction Handbook Manual

Search results

Summary of Contents for CD 1242

Reviews:

Brands by name

Popular brands