background image

CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS.

Before getting started, let’s check below lists to make sure it is just right for you!

2

Check your TV

VESA is within

Min and Max size

1

2

3

4

5

Does your TV

(including accessories)

weigh MORE than

100 lbs. (45.5 kg)?

What is your
wall made of?

Do you have

all the tools

needed?
(Not included)

Caution

MAX:400mm/15.75"

(MIN:75mm/2.95")

MAX:400mm/15.75"

(MIN:75mm/2.95")

No - This mount is NOT compatible.

Yes - Perfect !

No? Perfect – you may continue.

Yes? This mount is NOT compatible.

     CAUTION:  DO NOT exceed the maximum weight

indicated. This mounting system is intended for use only

with the maximum weights indicated. Use with products

heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.

Socket

Wrench

1/2"(13mm)

Electric

Drill

Screw

driver

Level

Pencil

Tape

Measure

Stud

Finder

5/32"(4mm)

Wood Drill Bit

3/8"(10mm)

Masonry Drill Bit

Hammer

● This product is designed for use in wood stud, solid concrete walls - DO NOT install  into drywall alone
● The wall must be capable of supporting five times the weight of the TV and mount itself
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Awl

Drywall with

wood studs?

CAUTION:

Solid concrete

?

Unsure?

Call Customer Service:

1-800-460-0956

75X75

Summary of Contents for WFM009-01
















Reviews: