manualshive.com logo in svg

USTER HVI SPECTRUM, Instruction Manual, Page: 23 / 230

Share
Download
USTER HVI SPECTRUM Instruction Manual Download Page 23

USTER

®

 

HVI SPECTRUM

 

Instruction Manual 

 

 

 

Uster Technologies, Inc. 

Chapter 1 

 

Overview • Page 1-9 

7.4

 

Moisture Probe 

 
The moisture probe is mounted on the pressure plate that measures the 
Color/Trash.  If there is no Color/Trash module, the glass plate will be 
replaced with a filler plate. 
 
 
 

8

 

Software Features 

 
The 

HVI SPECTRUM

 uses a windows-based operating system with icon-

based software.  This provides a simplified user interface.   An optional 
bar code reader may be used for easy operation of the equipment.   
 
The 

HVI

 

SPECTRUM

 M

AIN 

M

ENU

 contains seven function buttons, which 

allow access the major areas of testing, setup, and data management.   
 
The major functions of the software are summarized in Chapter 3    of 
this manual.

  

The remaining chapters explain each of these functions in 

full detail. 
 
 

8.1

 

Error Messages 

 
Error messages are usually preceded by an audible tone that signals an 
instrument or test malfunction.  Audio tones also sound if test parameters 
have been exceeded.  A message statement displays on the monitor to 
indicate the nature of the problem.  Error messages are explained in the 
Appendix (Chapter 14   3) of this manual. 
 
 

Summary of Contents for HVI SPECTRUM







































































































































































































































Reviews:

No comments