USTER HVI SPECTRUM, Instruction Manual, Page: 209 / 230

USTER
® HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 14
Appendix • Page 14-23
3
Error Messages
When the microprocessor is unable to accept or process information,
various error messages are displayed on the screen. These messages
appear in a highlighted block and are normally accompanied by a long
audio tone. If any of these messages occur repeatedly, call an Uster
Technologies’ service technician.
The following is a list of error messages with an explanation as to why
the error may have occurred.
“At least one color grade
must be entered” The color test cannot proceed until
it has a color grade to compare
to the cotton sample.
“No color grades defined
for this lot limit” Either no color grades have been
entered, or none of the color
grades you have entered are
acceptable for this lot limit.
“No color chart has been
selected”
In Edit mode of the color chart
wizard, you must select a color
chart menu from the drop-down
combo before you can edit.
“Color chart name has
not been changed” A new color chart is being
generated but the title must be
changed from the default “New
Color Chart” name.
“The color chart name
already exists”
You are attempting to create a
duplicate color chart by giving it
the same name as one that
currently exists.
“VP.CFG File was not
FOUND”
The file vp.cfg was not found in
the c:\hvi directory. This file must
be present for the Framegrabber
to be initialized.