Multifunctional serial to Ethernet module user manual
www.tcp232.net
Jinan USR IOT Technology Co., Ltd
Page22
////
9
55 BA for write Port0
，
55 BC for read port0;
55 C1 for write Port1
，
55 C3 for read port1;
55 C2 for write Port2
，
55 C4for read port2(Port2 only for-500).
2. For further information, see <USR-TCP232-XX config protocol V3.doc>.
4.3.
4.3.
4.3.
4.3. network
network
network
network command(setup
command(setup
command(setup
command(setup software)
software)
software)
software)
1. through software USR-TCP232-E45 Setup V1.0.5.0;
2. Network command(need to ask for protocol before purchasing).
Downbelow is the Setup for USR-TCP232-E45,
Diagram 4-2 Setup software
(1)click ‘Search Device’;
(2)Select device in search list;
(3)Modified paramters such as static ip;
(4)Click ‘Base Save’, paramters will be saved;
(5)Click ‘Save Config’, the paramters will take effect;
(6)Search again, module will appear in new paramters.
Note.
After modified paramters, need first ‘Base Save’ or ‘Save COMX’, then ‘Save Config’.
If not, the paramters will only be saved, but not take effect.
