USR IOT USR-WIFI232-T, User Manual

Page: 55 / 72

Low power WIFI module user manual http://en.usr.cn
Jinan USR IOT Technology Limited tec@usr.cn Page 55/72
4.2.2.54. AT+UPAUTO

Function: Remote Application, Webpage, factory setting upgrade

Format:

Query Operation
AT+UPAUTO<CR>
+ok=<log><CR>< LF ><CR>< LF >

Parameters:

log: Some status print log from remote upgrade.
Note: After execute this command, the USR-WIFI232-T will automatic start upgrade Application,
Webpage, factory setting base on the setting of UPURL, UPFILE command contents;
4.2.2.55. AT+LOGSW

Function: Open/Close remote upgrade logfile

Format:

Query Operation
AT+LOGSW<CR>
+ok=<status><CR>< LF ><CR>< LF >

Set Operation
AT+LOGSW=<status><CR>
+ok<CR>< LF ><CR>< LF >

Parameters:
 status:

on: Open. The UART Port will print some upgrade status
when upgrading. the log file will be sent to UDP Port
after successfully

off: Close.
4.2.2.56. AT+LOGPORT

Function: Set/Query remote upgrade UDP port of log file.

Format:

Query Operation
AT+LOGPORT<CR>
+ok=<port><CR>< LF ><CR>< LF >

Set Operatioin:
AT+ LOGPORT =<port><CR>
+ok<CR>< LF ><CR>< LF >

Parameters:

port:
The remote upgrade UDP port of log file.
4.2.2.57. AT+UPST

Function: Start remote upgrade;

Format:

Query Operation
AT+ UPST<CR>