USR IOT USR-TCP232-E2, Manual

Page: 31 / 45

Multifunctional serial to Ethernet module user manual www.usriot.com
Jinan USR IOT Technology Co., Ltd tec@usr.cn
Page31 //// 9
4.5. 4.5. 4.5. 4.5. Reload Reload Reload Reload
This button is used to restore factory settings. Press the button, keep it pressed, then power on,
after 2 second, free this Reload button, device will be back to factory settings.
Default settings main parameters as follows
Address type
：
static IP
Static IP Address
：
192.168.0.7
User name
：
admin
password
：
admin
5.
5. 5.
5. Paramters
Paramters Paramters
Paramters configuration
configuration configuration
configuration
5.1.
5.1.
5.1. 5.1. Web
Web
Web Web page
page
page page
Usually, this series of TCP232 module is configured through web pages.
5.2. 5.2. 5.2. 5.2. Serial Serial Serial Serial port port port port
1. This function. Which we mean Config module's param via serial port, need the coordination of
reload pin as a config pin.
2. For further information, see protocol pdf: http://www.usriot.com/Download/222.html
http://www.usriot.com/Download/222.html http://www.usriot.com/Download/222.html
http://www.usriot.com/Download/222.html
5.3.
5.3. 5.3.
5.3. network
network network
network command(setup
command(setup command(setup
command(setup software)
software) software)
software)
1. through software ;
2. Network command(need to ask for protocol).
Down below is the Setup, http://www.usriot.com/Download/90.html http://www.usriot.com/Download/90.html http://www.usriot.com/Download/90.html http://www.usriot.com/Download/90.html