USR-TCP232-302 User Manual
h.usriot.com
Jinan USR IOT Technology Limited
38 / 53
Module IP
4
07 00 A8 C0
Module IP
Module Port
2
8C 4E
Module Port
Gateway
4
C9 00 A8 C0
Gateway IP
Work mode
1
01
0:UDP Client, 1:TCP Client
2:UDP Server, 3:TCP Server
Baud rate
3
00 C2 01
Port baud rate
Port parameter
bit
1
03
Data bit, stop bit, check bit
Independent ID
3
00 00 00
ID-H,ID-L,ID-type, if don’t need, write 0
（
ID type has addition meaning ,refer
to appendix
Ⅰ）
Subnet mask
4
00 FF FF FF
Subnet mask,Little Endian
Sum Check
1
61
Sum check, from target IP to sum
check (result keep low byte )
3.8. UART Framing mechanism
3.8.1. packing method
TCP232-302 accepts time packing method.
1) packing time standard: more than 4 byte packing time.
2) Calculation method :
√ TCP232-302 Port parameter :data bit 8 byte, stop bit 1 byte, start bit 1byte.
√ Length of one data : 8+1+1=10
√ Packing time of four byte:
√ Port packing length : 400 byte.
√ When baud rate is 115200, default packing time 0.4ms.
3.8.2. Flow calculation
When TCP232-302 work in Cloud mode ,it receives network data, then it sends to
Port. Because port speed is limited, sometimes data will overflow.
E.g network data will send m byte data every n seconds. To check whether data can
Overflow : (support notwork is in good station ,network data transmission time is negligible ) If data won’t
overflow , m byte data can be finished in n seconds.
M byte data transmission time :
