USR-GPRS232-730 User Manual
Jinan USR IOT Technology Limited
/ 45
10
3.1. Setup Process
USR-GPRS232-730 will automatically connect to GPRS network and server, get into correct work mode
and open serial port according to the pre-set parameters.
Pre-set parameters
Work mode
Network transparent transmission mode
HTTPD mode
SMS transparent transmission mode
Default TCP/UDP connection
Protocol
Connection (Long/Short)
Destination port
Destination IP
UART parameters
Baud rate
Data bit
Parity bit
Stop bit
Hardware flow control
Setup and restart, module will work according to pre-set parameters.
3.2. Work mode
There are 3 work modes in total
Network transparent transmission mode
HTTPD mode
SMS transparent transmission mode
Switching Work Mode
Customers can change work mode by sending AT+WKMOD
Work mode
Command
SMS message transmission mode
AT+WKMOD=”SMS”{CR}
Network transmission mode
AT+WKMOD=”NET”{CR}
HTTPD mode
AT+WKMOD=”HTTPD”{CR}
<Note>
After setting, user need to restart module.
{CR} means carriage return, hex number is 0x0D.
More details of AT commands, please refer to chapter 4.1.