USR IOT RJ45, User Manual

Page: 4 / 41

Convert Server User Manual www.usriot.com
Jinan USR IOT Technology Limited 4 / 41 tec@usr.cn
1. 1. 1. 1. Quick Quick Quick Quick Start Start Start Start
This chapter is the quick start for Convert Server.proposal user read this chapter and follow the instructions.
This will help your understanding of the product. Of course, the user can choose read chapters according to
need .For specific details and instructions, please refer to the following.
1.1.
1.1.
1.1. 1.1.
Hardware Hardware Hardware Hardware connect connect connect connect
In order to test the serial port to the WIFI/ Ethernet communication transformation,connect the the device
serial port to PC serial port, connect the device WIFI/Ethernet to PC WIFI/Ethernet.If the desktop does not
own the serial port, also can use USB 232 to replace. The hardware environment.
Ethernet
D C 5-1 8 V
2 3 2
4 8 5
Select Ethernet
o r W I F I
Select 2 3 2 o r
4 8 5
Figure
Figure Figure
Figure 1
1 1
1 Hardware
Hardware Hardware
Hardware Connect(610)
Connect(610) Connect(610)
Connect(610)
According to the above connect Convert Server.
1.2.
1.2.
1.2. 1.2. Network
Network
Network Network connection
connection
connection connection
Open Wi-Fi, search network on the PC, as shown in below, USR-WIFI232-AP_3378 is the default network
name (SSID) of the Convert Server.
Note: if the firmware version is V4, the SSID is "HF - A11x_AP".After the SSID is also like this.