▪
To put the Ganymede MEMS speaker inside of the speaker box, first, unscrew and separate
the PCB from the shell
▪
Remove the housing gasket and place the Ganymede MEMS speaker with the contact side up
▪
Lastly, place the housing gasket and the PCB on the shell, matching the orientation marks
available on the speakers and the PCB. For proper sealing, ensure that the screws are correctly
tightened.
The correct placement of the Ganymede MEMS speaker is illustrated below.
Setting up the System
Shell
Speaker gasket
Housing gasket
Gaynmede
MEMS speaker
PCB
2x Screws
(Not included)
Complete user manual available at www.usound.com/products.html
(Glued to the shell)
