Provide power to the Ananke 3.0 evaluation board using 5 V DC-connector
over the POWER plug
Use the 3.5 mm stereo jack cable to connect an audio source (signal gener-
ator, phone, mp3 player) to the INPUT plug in the device
Connect the USound earphones to the OUTPUT (Tiny XLR connector).
This quick setup uses the self-boot option of the DSP. At startup, it loads a pre-
configured set of parameters into the DSP that are stored in an EEPROM.
SETTING UP THE SYSTEM
USound provides the speaker box Carme designed for testing the performance of our
Ganymede MEMS Speakers. Should you require assistance or further information, please
contact [email protected]
