USOUND ANANKE 3.0 UA-E1030 Quick Manual Download Page 1

Page: 1 / 4

FEATURES

Drives MEMS-based earphone

with distinct sound per formance

Stereo amplifier for Ganymede

MEMS speakers

Analog audio inputs

DSP (programmable with analog

devices programmer)

PACKAGE CONTENT

Ananke 3.0 evaluation board

USound earphones

5 V power supply

3.5 mm stereo jack cable

Ear tip in different sizes

EVALUATION SET

ANANKE 3.0 UA-E1030

QUICK GUIDE

Ananke 3.0 is an audio evaluation set

designed specifically for piezoelec-

tric Ganymede MEMS speakers.

The amplifier evaluation board fea-

tures two amplifiers for driving the

USound earphones and digital signal

processor (DSP). The DSP allows im-

plementation of customised acoustic

filter settings.

Summary of Contents for ANANKE 3.0 UA-E1030

Page 1: ...Sound earphones 5 V power supply 3 5 mm stereo jack cable Ear tip in different sizes EVALUATION SET ANANKE 3 0 UA E1030 QUICK GUIDE Ananke 3 0 is an audio evaluation set designed specifically for piez...

Page 2: ...the USound earphones to the OUTPUT Tiny XLR connector This quick setup uses the self boot option of the DSP At startup it loads a pre configured set of parameters into the DSP that are stored in an EE...

Page 3: ...ad Load range for the amplifier without earphones 20 100 nF Vin Input voltage range 400 mV Rin Input resistance 10 kOhm VDC Speaker DC offset voltage 15 V AV Amplifier gain fin 80 Hz 23 V V SPL Sound...

Page 4: ...tly In respect of the intended use of USound products by the custom er the customer is solely responsible for observing existing patents and oth er intellectual property rights of third parties and fo...