6) Mounting your CatMouse
TM
:
option #1
Wall Mounting:
a) Tap in pin/nail provided. Place the
keyhole at the back of the CatMouse
TM
unit over the nail (fig. 3).
OR
b) Drill/punch a 3/16” hole in desired
mounting location. Press anchor firmly
into hole. Turn in the screw leaving
approx. 1/4” of the screw extending
from the wall. Place the keyhole at the
back of the CatMouse
TM
unit over the
screw (fig. 3).
option #2
Surface Mounting:
Separate opposing repositionable
mounting strip sides. Clean surfaces to
be adhered to with denatured rubbing
alcohol. Remove adhesive backing
paper from one side and attach to
desired location. Remove adhesive
backing paper from other side and
attach to the CatMouse
TM
. Secure unit
to desired location (fig. 4).
note:
Do not cover keyhole or labels
with mounting strips.
15
CATMOUSE
TM
operation & installation
fig. 4
fig. 3
*CM-X1 USER GUIDE_Layout 1 2/21/12 3:18 PM Page 17
