usha Verve 15L, Instruction Manual And Warranty Card, Page: 8 / 12

Different Modes on Water heater panel Setting the clock
13 14

In the normal case, there would be four display interface in the display panel

User can set the clock with help of remote or buttons on display panel

This function will operate in Standard /Timer mode only

Short press “Mode” to switch to Standard or Timer Mode

Press the set key for 3 secs and the “hour” digits start to flash
(such as “15”) with a clock icon at the right side of screen

Short press “V”or “ Λ ” to set digits on hour basis (with long press,
digits shall change faster)

To toggle and change Minute time (such as “35”), press set button
once

Short press “V”or “ Λ ” to set the digit on minute basis ( with long
press, digits shall change faster)

Short press “set” or keep no operation for 5 seconds, updated
setting shall be memorized and machine returns to former screen
Off Standby Time Display Temperature Display
X X
✓
X
Standard Timer Eco Anti bacteria
✓ ✓
X X
The water will be heated up to 80
0
C to kill up to
97% of bacteria in the inner tank for one hour. Till
the time of operation ,the indicator light will be in
orange.
Once this operation is finished,the indicator will
become blue and water heater will go into
standby state.
It is recommended that you use this feature once
in a month
Applicable Interface
Water Heater will work on regular intervals to
keep the water temp. at 55
0
C for more energy
saving.
Applicable Interface
Off Standby Time Display Temperature Display
X X
✓ ✓
Off Standby Time Display Temperature Display
X X X X
Eco mode
Applicable mode Applicable Interface
Anti bacteria Mode
Clean
Long Press
“set”
Short Press
“V”or “ Λ ”
Short Press
“set”
Short Press
“V”or “ Λ ”