usha FH 3213-H, Instruction Manual

Page: 6 / 12

6
opERATIoN
Insert the plug (12) into the electrical socket, and set the button (7) to the “I”
position. The light indicator (28) will light up and sound signal will be heard.
Using the buttons on the control panel:
• Press the ON/OFF button (19), sound signal will be heard and fan mode
indicator (29) will light up, room temperature indicator (21) will be displayed.
• To select low power, press the (15) button, the indicators (23) and (30) will
light up; to select maximal heating power, press the (16) button, the indicators
(24) and (30) will light up.
Note
- Use low power for small rooms heating, and max. power for large rooms
heating.
• Set the required temperature for heating by pressing the (13) “- “or “+”
buttons, the indicator (22) will light up
Note
- When room temperature exceeds the preset temperature by 2°, the fan
heater will switch off.
- The fan heater will switch on again when temperature decreases by 1° lower
than the preset temperature.
• You can set temperature from 4˚C (39˚F) to 32˚C (90˚F), setting step is 1˚C.
Note
- In this unit possibility to change temperature indication is intended from
Celsius (˚C) to Fahrenheit (˚F). Press and hold the (13) buttons “-“and “+”
more than 3 seconds.
• To switch on humidifying function press the (20) button, the indicator (25) will
light up.
Note
- If the water tank is not full, when you press the (20) button the indicator (27)
will light up, it means that the water tank is empty.
• Switching on the fan heater rotation mode during heating the room is
performed with the (18) button, to switch off the rotation press the (18) button
again.
• Timer time selection is performed with the (17) button, the reset time will be
displayed. You can set operation time from 1 till 8 hours (1h, 2h, 4h, 8h).
• To switch off the fan heater press the (19) button, set the (7) button to the “0”
position, and then unplug the unit.