usha FH 3212 PTC, Instruction Manual

Page: 5 / 8

1. Handle 8. Base
2. Handle dowel 9. Bottom cover
3. base of Handle 10. Swing base
4. Temperature adjusting knob 11. Swing switch
5. Head cover 12. Back cover
6. Power setting knob 13. Power line jacket
7. Wind out-let grill 14. Power line
• Display and operation panel
OPERATION INTRODUCTIONS
• Installation
n
Take the devices out of packing,
n
Put the master device on a desktop, as showed below;
• Switch function
n
Make sure the voltage and frequency is complied with the technical
parameters (220V-240V AC, 50Hz), then connect the power.
n
Using instruction
1. Power setting knob
ä
Counter-clockwise rotate the knob to "COOLER", then the PTC element will
not work, and only function as fan.
ä
Rotate the knob to "OFF", then the device stop working.
ä
Clockwise rotate the knob to "LOW", then the device start working in lower
power situation.
ä
Clockwise rotate the knob to "HIGH", then the device start working in high
power situation.
Attention: If the knob turns to "HIGH" position, then can not clockwise rotate
anymore. Otherwise, it will damage the knob, and affect the function.