6
Attention:
Functions of the remote control buttons fully correspond to those of the control
panel buttons. Automatic release button The fan heater is equipped with auto
release button when overheated.
• If the unit starts overheating, automatic thermal switch will be on, the fan
heater will switch off.
• In this case immediately take the plug out of the socket.
• Make sure that the rear and the front grids are unrestricted and nothing
prevents air flow.
• Let the fan heater to cool off for about 15-20 minutes before switching it on
again.
• Plug the appliance, switch it on and set power and room temperature again.
• If the unit does not switch on it may mean that there are damages. In this
case please contact your nearest authorized Usha service centre.
clEANINg ANd MAINTENANcE
• Unplug and take the plug out of the socket before cleaning.
• Wipe the unit case with a dry cloth.
• Do not use solvents or abrasive substances for cleaning.
• Do not immerse the fan heater in water or any other liquid. Take care liquid
does not get into the fan heater case in order not to damage it or avoid
electric shock.
• After cleaning put the fan heater in the box and keep in a dry place.
• Provide the cord does not touch sharp objects.
• Before using the fan heater for the next time check its functionality and
isolation of the cord.
TEcHNIcAl spEcIFIcATIoNs
Vo
ltage:
220-240V AC, 50Hz
Wattage:
Low: 1000W/ High: 1800W
Summary of Contents for FH 3212-C
Page 1: ...FAN HEATER Model No FH 3212 C Instruction Manual...
Page 8: ......
