Installation
09/20
Fl Detect Set V2
8
5
Installation
5.1
Mounting of the Fl Detect Set V2
The water sensor can be screwed to a wall, among other things.
To prevent triggering by only superficial moisture, please
keep a small distance between the sensor and the
ground.
If possible, also keep a small distance between the
sensor and the wall to speed up the drainage of water at
the sensor after an alarm.
5.2
Splitter and cable placement
Route the splitter and all I/O cables higher than the water
sensor to protect the splitter and connectors from water
in the event of flooding.
