Intended Use
03/19
Fl Detect Set
5
3
Intended Use
Please observe the notes in this operating manual as well as the
operating conditions and permissible data in the data sheet so that
the system functions perfectly and remains operational for a long
time. In case of non-observance of these instructions as well as in
case of inadmissible interventions into the system, any liability on
our part is void, as is the warranty on the system and accessories!
An external water sensor can be connected directly to the
Fl I/O connection. In this case, however, no Fl
Hub or further water sensor can be connected as the connection is
already occupied.
The Fl Detect Set contains accessories for splitting the
Fl I/O connector. Thus a Fl Hub and an
external water sensor, or several water sensors can be connected
in series.
If the water sensor detects conductive drinking water, the
Fl is shut off immediately.
An alarm reset can only be performed via the connected
Fl or its supply voltage.
Any other use or use going beyond this shall be deemed improper
use. The usetech GmbH is not liable for damages resulting from
this. The risk is borne solely by the user.
