5.14.2
Setting the ‘Master’ unit:
Overwrite the Mac address 001C.97.1F1021 on the 3 columns behind
‘Pre-defined Remote BD Address’. And then select the ‘Master Mode’; tick off ‘Pre-defined Remote BD
Address’ and click ‘Write’.
5.14.3
Setting the ‘Slave’ unit:
Check the Mac address of ‘Slave’ unit thru BT Configuration and select the ‘Slave
Mode’; select Status ‘Discoverable’ then click ‘Write’.
Note: When you finish above settings, the both power adapters of the two BT dongles must be removed, and then
restart the two BT dongles.
- -
18
