Chapter 2 Accessing the Camera
Once installed, the camera is accessible on a network. Follow these steps to configure the
network settings and access your surveillance images.
2.1 Installing on a Network
These instructions describe the basic connections to install the camera on the network.
1.
Using a standard network cable, connect the camera to your network.
2.
Connect to power using one of the methods:
Using the optional power adapter to connect to power.
Using the Power over Ethernet (PoE) function. The power will be provided over the
network cable.
3.
You can now access the Web interface of the camera.
If the camera is installed in a LAN with the DHCP server, use GV-IP Device Utility to
look up the camera’s dynamic IP address. See
2.1.1 Checking the Dynamic IP
Address
.
If the camera is installed in a LAN without the DHCP server, the default IP address
192.168.0.10
will be applied. To assign a different static IP address, see
2.1.2
Assigning an IP Address
.
Note:
You must set your browser to allow ActiveX Controls and perform a one-time
installation of the ActiveX component onto your computer at your first login.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
