7
Cover Component
Remove the cover component by loosening the three locking screws with the included
hex wrench.
Use the position indicated on the position sticker to drill the holes needed to mount the
camera base. Insert the expansion bolt into the holes. Match the base's mount
openings to the expansion bolts position, and then place the mounting screws through
the base's mount opening into the expansion bolt. Tighten the mounting screws to
ensure the camera base mounted securely.
z
Place the cover component back onto the base.
z
Please make sure the locking screw position on the cover component matches the
locking post on the base.
z
Tighten the locking screws after the cover component is in the correct position.
