Compatibility check passed
2.4 GHz WiFi Internet Connection
WIFI signal at gate operator
location is strong
Mobile Device with enabled
Bluetooth
USAutomatic Gate Operator
Screwdriver
1. BEFORE YOU START CHECK LIST
5. CHECK STATUS OF NEXX GATE
6. ADD NEXX GATE TO NEXX HOME
7. MOUNT IN CABINET
CONGRATULATIONS!
2. INSTALL MOBILE APP
3. CREATE ACCOUNT
4. ASSEMBLE AND CONNECT TO POWER
B. NO Activity Orange Light
Press and hold the factory
reset button using a paper
clip or similar until steady
Activity Orange Light is
visible.
Download and install from
Apple App Store or Google
Play Store:
Nexx Home
Open Nexx Home app and
create an account with Nexx.
You are good to go.
If you have any issues or questions, please reach us at
support @usautomatic.com
If you need help just send an email to
support @usautomatic.com
Log in to Nexx Gate app and tap to
add device.
Follow the configuration process.
A. Steady Activity
Orange
Light is ON:
Continue to next step
APP ready control board - all models:
Use the DB9
to DB9 cable
Patriot control board without
DB9 connector:
Use the DB9 to flying lead
cable (5 wires) See chart
below for wiring instructions.
o
o
o
o
o
o
Follow us for promotions, tips and tricks, and more
on:
POWER
WIFI
ACTIVITY
Powered by
USAutomatic
Nexx Gate
POWER
WIFI
ACTIVITY
Powered by
USAutomatic
Nexx Gate
POWER
WIFI
ACTIVITY
Powered by
1
2
7
3
9
Control Board J2 pin 1
Control Board J2 pin 2 or J2 pin 7
Control Board J2 pin 2 or J2 pin 7
Patriot Actuator cable Close Limit
White Wire - Pull to Open
Orange Wire - Push to Open
Control Board J2 pin 3
Red
Black
Yellow
White
Green
DB9
Pin #
DB9
Wire
Patriot Gate Opener
Connections
Interface Cable Connections for Patriot Control Board
USAutomatic
Nexx Gate
The USAutomatic metal cabinet is equipped with
mounting studs on the inside box wall on the
right side which can be used to securely attach
the Receiver module inside the control box.
Older models might not have these mounting
studs.
For plastic enclosures, the Receiver may be
attached to the shelf.
