-3-
2-2
Playlist Mode
: Operate and control the like it is a CD changer. This mode
allows you to access up to five Playlists on the . This is also referenced as
External Control Mode of the . The detail instruction of Playlist creation and
playback controls are in section 5 of this manual.
DIP switch #2 is for mode selection use.
"ON"
position is for
Playlist Mode
and
"OFF"
position is for
Direct Mode
. It is preset to
Playlist Mode
at factory.
Note: Disconnect from PA11-VW before switching DIP switch #2 for mode alteration.
2-3 Additional AUX INPUT Option Selection
PA11-VW interface adaptor is capable of connecting two audio sources to your
VW radio including the . The additional audio source connects to the RCA
input jack labeled as AUX INPTUT. If you choose to use AUX INPUT, the DIP
switch #1 at the side of adaptor box must be set to "OFF" position (factory presets it
at "ON" position).
The audio source at AUX INPUT can be accessed at CD 6 Track 1 after selecting CD
changer SOURCE on the radio. CD 1 to CD 4 are for accessing Playlists and CD 5 is
for accessing all songs on .
Operation of AUX
If the "AUX INPUT" option is selected, radio will display "CD 6 Track 1" when
AUX
button is pressed. "CD 6 Track 1" gives access to the audio source connected to AUX
INPUT port.
Adjust VOLUME, BASS, TREBLE and etc. as you would normally do for the other program
sources on the radio.
PA11-VW provides two ways to control your through car radio, namely
Playlist Mode
and
Direct Mode
.
2-1
Direct Mode
: Search and select music on directly just as you would in portable
use. The sound of music will play back through your car stereo. Use the track up
down, fast forward and reverse buttons on your radio to control music playback.
All control functions on are available to use too. Please see section 4 of this
manual for additional information
Section 2. PLAYLIST MODE, DIRECT MODE and AUX OPTION
Section 3. INSTALLATION
Step 1- Remove radio from the dash.
Step 2- Plug the round din plug on CB-PVW to PA11-VW interface adaptor where it is
labeled "RADIO" .
Step 3- Plug the black rectangular connector on CB-PVW cable to the factory prewired
connector for CD changer. (If a CD changer exists, disconnect it first.)
Step 4-a- Connect the audio output of your auxiliary devices to AUX input jack on PA11-VW
adapter box if the additional AUX option is selected by setting the DIP swich#1
to "OFF" position.
Step 4-b- Set the DIP switch #2 to "OFF" position only if the
Direct Mode
is preferred.
Step 5- Plug CB-PA14 cable to PA11-VW adaptor box where it is labeled "iPod" .
Step 6- Reinstall radio to the dash.
WARNING!!
Use only the connection cable which comes with PA11-VW interface adaptor.
connection cables from other sources may look similar, but they may damage
your .
