DIP SWITCH SETTING FOR LEXUS RADIOS
NOTE (1):The default settings may conflict with this radio.
Use the
BT35-TOY DIP Switch Setting Chart
to emulate different modes
(See chart below).
Do not use SAT setting if there is an XM
tuner in the vehicle.
NOTE (2): 00-03 RX300 require CAS-TLC* adaptor cable. Vehicles must
have external CD changer in the glove-box. Disconnect the CD
changer and connect the CAS-TLC* cable and BT35-TOY in the
glove-box.
NOTE (3): 01-03 Lexus requires adaptor cable CAS-LEX*.
NOTE (4): Connect BT35-TOY at the ECU for the following vehicles with
Rear Seat Entertainment,
Lexus GX470/RX330 06 & older,
The ECU
is in passenger side rear quarter panel and
an 18 pin CAS-NIS_EXT cable is needed.
*CAS-TLC, CAS-LEX, CAS-NIS_EXT cables must be
purchased separately
#2
#3
#4
02 - 03
(1)(3)
All Radios
OFF
ON
OFF
CD/DISC
04 - 10
(1)
All Radios
OFF
OFF
OFF
CD/DISC
GS 300/350/430/450H
05 - 09
(1)
All Radios
OFF
OFF
OFF
CD/DISC
04 - 06
(1)(4)
All Radios
OFF
ON
OFF
CD/DISC
07 - 09
(1)
All Radios
OFF
OFF
OFF
CD/DISC
01 - 05
(1)(3)
All Radios
OFF
ON
OFF
CD/DISC
06 - 09
(1)
All Radios
OFF
OFF
OFF
CD/DISC
LS 430
01 - 06
(1) (3)
All Radios
OFF
ON
OFF
CD/DISC
LS 460
07 - 09
(1)
All Radios
OFF
OFF
OFF
CD/DISC
LX 470
02 - 08
(1) (3)
All Radios
OFF
ON
OFF
CD/DISC
LX 570
2009
(1)
All Radios
OFF
OFF
OFF
CD/DISC
00 - 03
(1)(2)
All Radios
OFF
ON
OFF
CD/DISC
04 - 09
(1)(4)
All Radios
OFF
OFF
OFF
CD/DISC
Year
Radios
DIP Switch
Radio
button to
NOTE
L
E
X
U
S
ES 300/330/350/400H
GX 470
IS 250/300/350
RX 300/330/350/400H
Make
Model
BT35-TOY DIP Switch Setting for LEXUS
(Please read notes)
Device Compatibility
Most Bluetooth devices (such as iPhone 3G/3GS/4/4S, iPod Touch 3rd/4th
generations, and Android phones) are compatible with the BT35. However,
USA SPEC does not guarantee that all Bluetooth devices are compatible. For a
current list of compatible devices, please refer to our website www.usaspec.com
Pairing the Bluetooth Device
Steps to Pair Your Bluetooth Device
Step 1: After your BT35 has been properly installed into your vehicle,
turn on the ignition and the radio.
Step 2: Select the CD or SAT button on your radio (this will depend on what
DIP switch setting the BT35 is on). This will put the radio in
Bluetooth mode and you should see either
Figure 1
or
Figure 2
. If
you have a text button on your radio, you may have to push the text
button a few times to get to this screen.
Figure 1
Figure 2
Step 3: Make sure your device’s Bluetooth setting is turned “on” on your
device and select “search for new devices”. (Refer to your
device’s owner’s manual). BT35 should show as one of the options.
Step 4: Select the BT35 to pair it with your device. If prompted to enter a
code (some devices may not require you to do so), enter “0000”.
Pairing may take up to 20 sec. When you are connected, you will
hear the voice prompt “
Connected
”.
Once paired, the BT35 will automatically recognize and connect your Bluetooth
device whenever you turn on your ignition.
Additional Pairing Information
Ÿ
Some devices may require additional steps while pairing. Refer to your
device’s owner’s manual.
Ÿ
The BT35 can be paired with up to 8 devices, but will only connect to 1
device at a time.
Ÿ
On some vehicles, the BT35 will automatically turn on your radio when you
start the ignition in order to connect with your device.
5
6
1
2
3
4
N/A
OFF
OFF
OFF
CDC1
N/A
OFF
ON
OFF
MD
N/A
OFF
ON
ON
CDC2
N/A
ON
ON
ON
SAT
Radio Button to
Press
CD/DISC
AM/SAT
CD/DISC
CD/DISC
DIP switch
Emulated
Summary of Contents for BT35-Toy
Page 1: ......
