- 10 -
(5) Auto Tuning(AT)
AT is recommended under 2 cases.
case1. When the change of current temp is fluctuating more than ±0.1℃.
case2. When the unit can not reach at the set temp.
Press
for 5 sec
during
operation
You can enter / quit AT mode by pressing for 5 sec when the unit runs.
AT will be finished automatically when it is done.
↓
(4) Start / Stop the unit
OUT1 lamp will be on or blinking during the unit runs.
TIMER lamp will be blinking and it will be on when the set temp is reached.
OUT2 is nothing to do with this product.
Press for 3 sec and the unit will start running with RUN lamp on.
Press for 3 sec and the unit will stop running with RUN lamp off.
RUN
OUT1
TIMER
OUT2
RUN
OUT1
TIMER
OUT2
RUN
OUT1
TIMER
OUT2
RUN
