802.11g 54Mbps USB Adapter User Guide
Note:
If you are connecting the 802.11g 54Mbps USB Adapter to a 1.1 USB port, you
may see a message informing you that a Hi-Speed USB device is being connected to
a USB port that is not Hi-Speed. This will not affect the installation procedure.
Step One: Install your software and drivers
Insert your U.S. Robotics Installation CD-ROM into your CD-ROM drive.
Note:
If your CD-ROM does not automatically launch, click Windows
Start
,
Run
, and
type
D:\setup
(if your CD-ROM drive uses a different letter, type that letter in place of
"D") and click
OK
.
The Installation CD Graphic User Interface (GUI) will appear on your screen. If
prompted, select your preferred language.
Read the license agreement and click
Yes
.
Select the 802.11g 54Mbps USB Adapter and click
Software
. Click
Wireless USB
Adapter Utility and Drivers
. Follow the on-screen instructions to finish the installation
procedure.
Windows Me:
If you are prompted, restart your computer and continue to follow the
on-screen instructions.
Step Two: Install the 802.11g 54Mbps USB Adapter to your
computer
When you are prompted, insert the 802.11g 54Mbps USB Adapter into an available
USB port on your computer.
file:///C|/Arcadyan/USR/SW/English/three.html 第 2 頁 / 共 6 2004/9/15 下午 05:34:54
