US Robotics Wireless Ndx ADSL2+ Gateway, Quick Installation Manual

Page: 7 / 124

English
3
Default Values
The Wireless
N
dx ADSL2+ Gateway has the following default values:
!
IP Address :
192.168.1.1
System Requirements
!
ADSL line installed by your Internet Service Provider
!
A computer with an Ethernet adapter installed
! An HTML 4.01-compliant Web browser with JavaScript enabled
Installation Instructions
Step One: Connect Microfilter(s) (if included or required by your ISP)
A microfilter removes interference between voice and ADSL signals. If a micro-
filter was not included with the gateway, ask your ISP if microfilters are necessary
for your telephony devices.
1. Plug each telephony device cable (telephone, fax machine, etc.) into a micro-
filter.
2. Connect the microfilter into the telephone wall jack.
N o t e :
Do not install a microfilter on the cable that will connect your gateway
to the telephone jack unless you have a dual connection microfilter
with a connection for both the gateway and the telephone.