802.11g Wireless Turbo PC Card
Installation Guide
Package Contents:
d
r
a
C
C
P
o
b
r
u
T
s
s
e
l
e
ri
W
g
1
1
.
2
0
8
-
e
d
i
u
G
n
o
it
a
ll
a
t
s
n
I
k
c
i
u
Q
-
M
O
R
-
D
C
n
o
it
a
ll
a
t
s
n
I
-
Note:
For the most updated information, visit:
http://www.usr.com/support
. You
can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for
more detailed information.
802.11g Wireless Turbo PC Card Installation
Prepare for software installation
Turn on your laptop computer. Type your password if you are prompted to do so.
Note:
Your product number is USR5410. It is very important that you have your serial
number written down before you install the 802.11g Wireless Turbo PC Card. You can
find your serial number on the back label of the 802.11g Wireless Turbo PC Card and
on the side of the package. If you ever need to call our Technical Support depart-
ment, you will need this number to receive assistance.
Note:
Be sure to find out what letter your CD-ROM drive uses before you begin
installing your new product. You will need to know this to properly install your
software.
Note:
During the Installation procedure, you may be prompted for your Windows
Operating system CD-ROM. Make sure you have it available in case you need it.
Install your software and drivers
Note:
You will need to install this software on all the laptops you plan to
wirelessly network together.
Insert your U.S. Robotics Installation CD-ROM into your CD-ROM drive.
Note:
If your CD-ROM does not automatically launch, click Windows
Start
,
Run
,
and type
D:\setup
(if your CD-ROM drive uses a different letter, type that letter in
place of "D") and click
OK
.
The Installation CD Graphic User Interface (GUI) will appear on your screen. If prompted,
select your preferred language.
Some files will be copied to your system, and then you will be asked to read the license
agreement. Read the agreement and click
Yes
. Select your product and then click
Software
.
Click
Wireless Card Utility and Drivers
. Follow the on-screen instructions and wait for
some files to be copied to your hard drive. A window will appear showing you the files
that are being loaded onto your system. If you are prompted to restart your computer,
close all open applications, select
Yes, I want to restart my computer now
, and then click
Finish
.
Insert the 802.11g Wireless Turbo PC Card into
your laptop computer*
Locate an available PC Card slot and fully insert the 802.11g Wireless Turbo PC Card. PC
Card slots are typically on the side of laptops. You should hear a beep when the 802.11g
Wireless Turbo PC Card is fully inserted and detected.
When Windows detects the new hardware, click
Next
. Follow the on-screen instructions to
complete the installation procedure. If you are prompted, restart your computer.
Note:
If you are prompted at any time for your Windows Operating System CD-
ROM, remove the U.S. Robotics Installation CD-ROM and insert your Windows CD-
ROM into the CD-ROM drive. When all of the files are copied, remove the
Windows CD-ROM, and reinsert the U.S. Robotics Installation CD-ROM.
Congratulations!
You have finished installing your hardware and your drivers! The
802.11g Wireless Turbo PC Card will connect to an existing wireless network or other
wireless networking products in the area.
You should now see a small icon for the Configuration
Utility in the system tray by your clock on your computer
desktop. The Configuration Utility is used to change or
verify the configuration information that relates to your 802.11g Wireless Turbo PC Card.
The Configuration Utility icon will be colored to indicate the status of your wireless
network: red for disconnected or connected with poor quality, yellow for roaming, and
green for connected with good quality.
You must now configure each computer that has a 802.11g Wireless Turbo PC Card in order
to share Internet connectivity, files, and a printer. Refer to the User Guide on the
Installation CD-ROM for this information.
802.11g Adhoc
mode is used for peer-to-peer network configurations.
Infrastructure
mode
is used to connect to a Wireless Access Point. Each 802.11g Wireless Turbo PC Card in the
wireless network must have the correct mode selected within the Configuration Utility.
For troubleshooting and technical support information, refer to the other side of this
Guide or to the User Guide on the U.S. Robotics Installation CD-ROM.
Register your product
•
At the
In
stallation CD-ROM interface, click the Support
Support
Support
Support
Support link. Click
Registration and
Registration and
Registration and
Registration and
Registration and
W
W
W
W
Warr
arr
arr
arr
arranty
anty
anty
anty
anty
and then click
http://www
http://www
http://www
http://www
http://www.usr
.usr
.usr
.usr
.usr.com/pr
.com/pr
.com/pr
.com/pr
.com/productr
oductr
oductr
oductr
oductreg
eg
eg
eg
eg
If the Installation CD-ROM
interface does not run automatically, click Windows Start
Start
Start
Start
Start and then click Run
Run
Run
Run
Run. In the “Run”
dialog box, type D:\setup
D:\setup
D:\setup
D:\setup
D:\setup.exe
.exe
.exe
.exe
.exe. If your CD-ROM drive uses a different letter, type that letter
in place of “D.”
•
Or register your product online at http://www.usr.com/productreg
http://www.usr.com/productreg
http://www.usr.com/productreg
http://www.usr.com/productreg
http://www.usr.com/productreg
r
e
b
m
u
N
t
c
u
d
o
r
P
r
e
b
m
u
N
l
a
ir
e
S
0
1
4
5
R
S
U
part number R24.0361.00
Printed in Taiwan
*A “Digital Signature Not Found” screen may appear. Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested in conjunction
with the supported hardware and has verified compatibility with Windows Me/2000/XP.
