
1
Step 1. Connect the Wireless Access Point
• Use the Ethernet port and an RJ-45 cable to connect the Wireless
Access Point to one of the following devices: a cable or DSL modem
with routing capabilities, a hub, a bridge, an existing Ethernet LAN,
or a router.
•
Attach the antenna to the Wireless Access Point.
•
Attach the power supply to the Wireless Access Point.
Step Two: Install your software
Note:
You only need to install this software on the PC or laptop that was
originally connected to your modem, bridge, router, or hub.
Insert your U.S. Robotics Installation CD-ROM into your CD-ROM drive.
In the Choose Setup Language window, select your preferred language
and click
OK
.
Note:
If your CD-ROM does not automatically launch, click Windows
Start
,
Run
, and type
D:\setup
(or the appropriate letter of your CD-ROM drive)
and click
OK
.
Some files will be copied to your system, and then you will be asked to
read the license agreement. Read the agreement and click
Yes
.
All manuals and user guides at all-guides.com