Connect the 11 Mbps Wireless USB
Adapter to your computer
Plug the small end of the included USB cable into the USB port on the 11 Mbps
Wireless USB Adapter.
Locate an available USB port on your computer and insert the large rectangular
end of the included USB cable.
Note:
Make sure the USB cable is fully inserted into the USB port on
your computer and to the USB port on the 11 Mbps Wireless USB
Adapter. Your computer will not detect the 11 Mbps Wireless USB
Adapter if the USB cable is loose on either end.
When Windows detects the new hardware, click
Next
.* Windows may need to
copy some files. Wait for any files to be copied.
After a few moments, all the necessary files will be copied and the installation
procedure will be complete. If you are prompted, click
Finish
.
Note:
You may be prompted for your Windows Operating System CD-
ROM. Insert your Windows Operating System CD-ROM into the CD-ROM
drive. When Windows is finished copying files, remove the Windows
Operating System CD-ROM.
* A Digital Signature Not Found window may appear. Click
Yes
. Windows Me and
2000 will verify that your network device is properly installed.
